banner



How To Set Time On Acurite Wireless Thermometer

Acurite Logo

ACURITE Wireless Thermometer

Product

Limited ONE YEAR WARRANTY

Chaney Instrument Visitor warrants that all products information technology manufactures to be of good textile and workmanship and to be complimentary of defects if properly installed and operated for a catamenia of 1 year from date of purchase. REMEDY FOR BREACH OF THIS WARRANTY IS EXPRESSLY Limited TO REPAIR OR REPLACEMENT OF DEFECTIVE ITEMS. Any product which, under normal use and service, is proven to breach the warranty independent herein within ONE YEAR from engagement of sale will, upon examination by Chaney, and at its sole option, be repaired or replaced by Chaney. In all cases, transportation costs and charges for returned goods shall exist paid for by the purchaser. Chaney hereby disclaims all responsibility for such transportation costs and charges. This warranty will not be breached, and Chaney volition give no credit for products it manufactures which shall have received normal article of clothing and tear, been damaged, tampered, driveling, improperly installed, damaged in shipping, or repaired or altered by others than authorized representatives of Chaney.

THE ABOVE-DESCRIBED WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, Express OR IMPLIED, AND ALL OTHER WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED, INCLUDING WITHOUT LIMITATION THE Unsaid WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. CHANEY EXPRESSLY DISCLAIMS ALL LIABILITY FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL Damages, WHETHER ARISING IN TORT OR By CONTRACT FROM ANY BREACH OF THIS WARRANTY. SOME STATES DO Non ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE To a higher place LIMITATION OR EXCLUSION MAY NOT Utilise TO Y'all. CHANEY Farther DISCLAIMS ALL LIABILITY FROM PERSONAL INJURY RELATING TO ITS PRODUCTS TO THE EXTENT PERMITTED By Law. Past Acceptance OF ANY CHANEY'South EQUIPMENT OR PRODUCT, THE PURCHASER ASSUMES ALL LIABILITY FOR THE CONSEQUENCES ARISING FROM THEIR Employ OR MISUSE. NO PERSON, FIRM OR CORPORATION IS AUTHORIZED TO ASSUME FOR CHANEY Whatsoever OTHER LIABILITY IN Connexion WITH THE SALE OF ITS PRODUCTS. FURTHERMORE, NO PERSON, Firm OR CORPORATION IS AUTHORIZED TO MODIFY OR WAIVE THE TERMS OF THIS PARAGRAPH, AND THE PRECEDING PARAGRAPH, UNLESS Done IN WRITING AND SIGNED Past A DULY AUTHORIZED AGENT OF CHANEY. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND You MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM Land TO Land.

For in-warranty repair, please contact:

Customer Care Department
Chaney Instrument Company
965 Wells Street
Lake Geneva, WI 531

Chaney Client Care
877-221-1252
Mon-Fri 8:00 a.g. to 4:xxx p.m. CST
www.chaneyinstrument.com

This device complies with office fifteen of the FCC rules. Operation is field of study to the following two weather condition:

  1. This device may NOT cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.
    NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Role 15 of the FCC rules. These limits are designed to provide reasonable protection confronting harmful interference in a residential installation. This equipment generates, uses and tin radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Even so, In that location is no guarantee that interference will not occur in a item installation. If this equipment does cause harmful interference to radio or television reception, which can be adamant past turning the equipment off and on, the user is encouraged to try to right the interference by i or more than of the following measures:
    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and the receiver.
    • Connect the equipment into an outlet on a excursion different from that to which the receiver is connected.
    • Consult the dealer or an experienced radio/TV technician for assist.
      NOTE: The manufacturer is not responsible for any radio or Goggle box interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.
      Patent numbers: 5,978,738; 6,076,044; half dozen,597,990

Introduction

The Acurite® Thermometer with wireless outdoor sensor collects outside weather information and sends it wirelessly to the Display Unit via a low-power radio frequency. This thermometer has been designed to be piece of cake to install and utilise.
The sleek brandish unit of measurement houses a liquid crystal display (LCD) which volition calculate and display all the conditions data received from the wireless sensor outside. The display unit features a temperature sensor for measuring indoor temperature. The Display Unit of measurement is powered with two "AA" alkali metal batteries {not included).
The wireless outdoor sensor is completely wireless and contains a sensor for measuring outdoor temperature. The wireless outdoor sensor is powered with 2 "AA" alkali metal or lithium batteries (not included).
Please read through this manual to acquire more about the Acurite® Thermometer. Proceed this manual for future reference.

Parts Listing model #01031W
  1. Brandish Unit
  2. Wireless outdoor sensor

Display Features

Image 01

Bombardment Choice & Temperature Range

Extended periods of cold temperatures ( below -.4°F / -xx°C ) can cause alkaline batteries to function improperly. This will crusade the outdoor wireless sensor to finish transmitting temperature readings. Use lithium batteries in these depression temperature conditions to ensure connected performance for wireless sensors placed outdoors.

Image 02

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY Condom WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

Battery Prophylactic: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is non to be used for an extended period of time. Follow the polarity(+/·) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. 00 Not incinerate used batteries. DO NOT dispose of batteries in burn. as batteries may explode or leak. DO NOT mix sometime and new batteries or types of batteries (alkali metal/standard). Do Non use rechargeable batteries. Practice NOT recharge not-rechargeable batteries. Exercise Non brusque-circuit the supply terminals

Installing Batteries – Wireless Sensor

Remove the battery compartment cover. Install 2 fresh "AA" batteries as shown here.
BATTERIES MUST BE INSTALLED FOR THE SENSOR TO OPERATE

Image 03

Installing Batteries – Display Unit

Remove the battery compartment cover. Install 2 fresh "AA" batteries as shown here

Image 04

Nigh the Self Setting Atomic Clock

A clock is considered atomic if information technology has an accuracy of one second in a meg years. Consumer clocks are considered atomic if they achieve this accurateness by receiving a bespeak from an atomic clock. In North America, the National Plant of Standards and Technologies operates an diminutive clock in Colorado which transmits the time codes via the radio station WWVB. The Acurite clock yous have purchased includes a built-in receiver which picks up the signal from the WWVB station. For the all-time possible reception, place the brandish unit with the back side facing Colorado. NOTE: Due to solar radiations in the atmosphere, the atomic clock bespeak is weaker during the day. Most synchronization with the WWVB atomic clock bespeak happens at night when there is less interference.

Brandish Unit : Basic Setup

Press the "Set" button to enter into gear up mode. The time zone (side by side to the clock display) volition begin blinking.
To accommodate the currently selected (flashing) preference item, printing the "▲" or "▼" buttons.

To salve your adjustments, press the "SET" button again to motility on to adjusting the next preference. The preference prepare gild is every bit follows:
TIME ZONE ( PST MST CST EST AST HAST AKST)
DST (Daylight Saving Time ON or OFF)
CLOCK 60 minutes
CLOCK MINUTE
Agenda MONTH
Calendar Engagement
CALENDAR Year
You will automatically leave Set MODE if no entries are changed for 30 seconds. You may enter basic setup manner once again at any fourth dimension past pressing the "SET" button.
TO SELECT EITHER °FOR °C TEMPERATURE UNITS:

Press the "▲" button while in normal display style (Non in "SET" fashion).

Now that setup is complete, you must choose a location to place the wireless sensor and the dis(Play unit of measurement. The wireless sensor MUST be placed less than 165 feet (l meters) away from the display unit.
This wireless forecaster uses radio frequency for advice, which is susceptible to interference from other electronic devices and large metallic items or thick walls. Ever identify both units at least iii feet (0.91 k) abroad from appliances (Goggle box, microwave, radios, etc.) or objects that may interfere with the wireless communication (big metal surfaces,
thick stone walls, etc.).

Image 05

Placement of Display Unit

Place the display unit in a dry area free of dirt and dust. To assistance ensure an accurate indoor temperature measurement, be sure to identify the brandish unit out of direct sunlight, and away from whatsoever heat sources or vents in your home. There are 2 placement options for the display unit. You may hang the display unit on a wall using the integrated hang pigsty. Alternatively, you lot may identify the brandish unit on a table top or other flat surface using the integrated fold-out table top brandish stand.

Placement of Sensor

The wireless sensor MUST BE PLACED OUTDOORS to notice outdoor temperatures. The wireless sensor must be placed less than 165 feet (fifty meters) from the display unit. The wireless sensor is h2o resistant and is designed for general outdoor use. However, to extend the life of the product, identify the wireless sensor in an area protected from direct weather elements. To ensure an accurate outdoor temperature measurement, exist sure the wireless sensor is placed out of direct sunlight and abroad from whatever heat sources.
There are 2 placement options for the wireless sensor. You may hang it using 1 of the two integrated hang holes, or utilize string (non included) to hang it from a suitable location like a well covered tree branch.

TROUBLESHOOTING

Image 06

SPECIFICATIONS

Product Facts

Batteries: four x "AA" (not included) Lithium Batteries Recommended beneath -four°F

Measurement Ranges

Outdoor Temperature: -twoscore° F to 158° F (-xl° C to 70° C)

Indoor Temperature: 32° F to 122° F (0° C to l° C)

Wireless Range: 165 ft I 50m MAX

Depending on home construction materials. For all-time accuracy & operation, identify the wireless sensor in a location protected from directly sunlight and precipitation.

Limited 1 Year Warranty Instructions & Warranty Enclosed
Customer Care:
877-221-1252
www.chaneyinstrument.com

Ezoic

Acurite Logo

Documents / Resources

References

  • www.chaneyinstrument.com AcuRite Weather Monitoring | #1 Weather Station Brand in North America

Source: https://manuals.plus/acurite/wireless-thermometer-manual-2

0 Response to "How To Set Time On Acurite Wireless Thermometer"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel