How To Set Aspect Ratio Premiere Pro

Knowing how to modify the size and the attribute ratio of your video is i of the nearly important nuts of video editing, the wrong aspect ratio tin crusade y'all a lot of problems when editing and uploading your video. In this article, I will guide you through the steps of changing the aspect ratio in Adobe premiere pro.

The difference betwixt size and aspect ratio

The difference between video size and its aspect ratio can be a little confusing, but I'll make sure to clear it for y'all earlier we continue with the article.

The size of the video basically ways the verticle and the horizontal values of the video, while the aspect ratio is the ratio between the two values. That means there can be ii dissimilar videos with ii dissimilar sizes but their aspect ratios are the aforementioned.

A good example of this is the difference between a 4K video and a 1080p video, both videos have an aspect ratio of 16:ix just when it comes to the size the 4K video is much bigger than the 1080p one. The 4K video is 3840×2160 pixels while the 1080p ane is 1920×1080.

Types of attribute ratios

Widescreen (16:nine)

This is the most commonly used aspect ratio, it's used for youtube videos, movies, documentaries, and most of the videos online

Vertical (9:sixteen)

This type of video can be constitute in Tiktok, Instagram, youtube short, and it's the same aspect ratio of your phone when filming vertically.

Square (1:1)

This type of aspect ratio usually takes a square form and information technology was used on the old versions of Instagram and Facebook before the recent updates.

Anamorphic (2.twoscore:1)

This attribute ratio is mostly used in movies or in cinematic videos, it's very similar to the offset attribute ratio that we mentioned (sixteen:nine) merely it is cropped from the top and button which gives information technology that cinematic look.

Some people call it the cinematic horizontal black confined and if you want to learn how to reach it and make your video look more cinematic keep reading considering I'll talk about information technology at the end.

How to alter The aspect ratio

To change the Aspect ratio in premiere pro go to File>New>Sequence>settings>Frame size if you lot want to open a new projection, and Sequence>Sequence Settings>Frame size to modify the aspect ratio of an already existing project.

At present that you know how to change the aspect ratio, we need to talk over how to achieve sure aspect ratios by changing the horizontal and vertical values of the video

How to modify the aspect ratio to 16:9 (one.85:one)

To change the aspect ratio to 16:ix you lot'll need to go to sequence settings as nosotros showed earlier and modify the Horizant value to "3840" and the vertical to "2160" for a 4K UHD quality and for 1080p HD quality change the values to "1920" Horizontal and "1080" vertical.

How to Add The Cinematic Horizontal Black Bars in Premiere Pro

One of the best ways to make a video look more cinematic is past adding horizontal black confined on it, those bars give more than depth to the video and usually are very useful for broad shots.

And there are iii means to accomplish those black bars in premiere pro;

The first one is by only going to google and downloading the "Cinematic black bar" PNG after you only drag it and drop it over your video.

The second way to exercise it is by using an adjustment layer. to do it you'll need to:

• Become to File>New>Aligning layer,
• Drag the adjustment layer over the clips you lot want to add the blackness bars to
• And so go to Effects>Video effects>Transform>Ingather
• Driblet the effecton the adjustment layer
• Become to the effects control pannel and change the values Top and Bottom to 12%

The Third and the best way to exercise it and the way that professionals in Hollywood do it is past irresolute the aspect ratio:

You'll need to become to Sequence>Sequence settings and change the vertical value from "1080" to "803" for 1080p quality and from "2160" to "1606" for 4K quality. the blackness bars may not announced when working on premiere pro, but when yous upload information technology on another screen those black bars will appear since the background of the screen is ordinarily blackness.

And the style I got these numbers is I dividing the horizontal value of my original sequence or video by two.39, so f you have a different value than the ones that I mention you can use this method to decide the value that works for you.

And the reason that the tertiary way is the best manner, it's because information technology's faster while rendering since at that place are much fewer pixels to render and also because it provides a college quality compared to the commencement two methods.

Source: https://creatorsfield.com/how-to-change-the-size-and-aspect-ratio-of-your-video-in-adobe-premiere-pro-tutorial/

Share this post